POOL CONTROLS

Prior to your arrival we will set the pool temperature to 80 degrees but please note if you booked last minute it may take 12-24 hours to get to that temperature. The pool controls get their own section because the app is less than intuitive and many things can go wrong! If you are concerned or flummoxed please just text us and we can adjust it for you.

On the kitchen counter is a tablet.

  • Please keep this plugged in because the battery only has about 8 hours in it.

  • Please don't use it for anything else other than pool control.

  • If you have reset the router in the sun room this app will not work.

iAquaLink App

1) Press the iAquaLink logo on the home screen

2) Click ‘Xanadu’ and three tabs will be shown across the top with ’HOME’ being the default screen.

 

The ‘HOME’ tab  gives you the options of:

  • Set Temperatures

  • Spa Mode

  • Filter Pump

  • Spa Heater

  • Pool Heater

 

The ‘ONETOUCH’ tab

Ignore this one!

 

The ‘DEVICES’ tab

  • Pool Light - ON/OFF

(Ignore Aux2, Aux3, & Extra Aux)

 

3) Heating Stuff

There is only one heater and you can choose to either heat spa or the pool. The filter pump needs to be on to heat either spa or pool. You will note a 15-30 second delay between setting the spa on and it saying “ON” and seeing the spa jets come on.

 

To Heat the Spa

  • Spa mode - ON

  • Spa heat - ON

  • Filter Pump - ON

  • Pool Heat - OFF

This will heat the spa about 4 degrees an hour.

 

To Heat the Pool

  • Spa mode - OFF

  • Spa heat - OFF

  • Pool Heat - ON

  • Filter Pump - ON

This will heat the pool at about 1 degree and hour.